{"title":"Intercooler Kits","description":null,"products":[{"product_id":"mishimoto-2016-honda-civic-1-5t-2017-honda-civic-si-black-intercooler-kit-w-red-pipes","title":"Mishimoto 2016+ Honda Civic 1.5T \/ 2017+ Honda Civic Si Black Intercooler Kit w\/Red Pipes","description":"Keep the charged air temperatures down in your turbocharged Civic with the 2016+ Honda Civic Performance Intercooler Kit from Mishimoto! In the age of the turbocharger, Honda has finally joined the ranks of forced induction by equipping their tenth generation of the Civic with the L15B7. Where the Earth Dreams technology might be advanced, it still suffers from an age-old enemy -- heat. The stock intercooler utilizes a tube-and-fin construction coupled with plastic end tanks, giving high temperatures a perfect breeding ground. Our intercooler is designed with the Honda enthusiast in mind and eliminates high charged air temperatures that set up shop in the stock intercooler. The all-aluminum, bar-and-plate construction is specifically designed to shrug off heat generated from compressing air into the intake manifold. Our intercooler also has increased the volume by 102% and fin surface area by 97%, which helps drop outlet air temperatures by 20 F over the stock intercooler, and up to 42 F once a performance tune is added. The benefits of our upgraded design don't stop with the intercooler. Our direct-fit intercooler kit also gives the stock intercooler piping an overhaul. We ditched the plastic and rubber combination that made up the original equipment and replaced them with mandrel-bent aluminum and 5-layer, fiber-embedded silicone couplers. Our piping also increases the size of both the hot and cold-sides of the piping system from 42mm to 55mm, equating in a 30% increase in size. We also took the liberty of reducing the angles of the bends in the piping, giving the charged air a more direct flow through the intercooling system and improving the flow. Our performance intercooler kit adds up to 4 hp and 8 ft-lbs of torque on the stock tuning, with the potential to boost that power gain to 11 hp and 9 ft-lbs of torque with a tune. The Mishimoto 2016+ Honda Civic Performance Intercooler is available in Silver or Black core with the option of Wrinkle Black or\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eEX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eEX-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eEX-T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eLX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2018\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eLX-P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2020\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eSi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eSport\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eSport Touring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eTouring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2021\u003c\/td\u003e\n\u003ctd\u003eHonda\u003c\/td\u003e\n\u003ctd\u003eCivic\u003c\/td\u003e\n\u003ctd\u003eType R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720681951457,"sku":"MISMMINT-CIV-16KBKWRD","price":1620.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/2a3fe5687a02ef22bc69537e243619f3.png?v=1675905629"},{"product_id":"mishimoto-08-mitsubishi-evo-x-front-mount-intercooler-kit-black","title":"Mishimoto 08+ Mitsubishi Evo X Front-Mount Intercooler Kit - Black","description":"A high-horsepower Evo demands an intercooler setup that provides optimal airflow and a cool, dense charge of air. Modified vehicles running high boost pressures often have increased air intake temperatures (AITs) and heat soak, both of which can result in diminished performance. Keep your intake temperatures under control with the Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit. This intercooler kit is a direct bolt-on unit engineered specifically for the Evo X. Thanks to an efficient 3.5-inch thick bar-and-plate core, this intercooler provides optimal heat dissipation and low AITs. The robust cast aluminum end tanks provide superior durability and smooth, uninterrupted airflow. The intercooler core is a strategic fin design that promotes substantial heat exchange while providing minimal pressure loss across the core. This kit also features polished 2.5-inch mandrel-bent aluminum piping and four-layer 100% silicone couplers with heat-resistant embedded fibers. These couplers offer increased heat and pressure tolerance compared to the factory rubber connections. Dependable charge-air connections are essential for reliable operation. The Mishimoto Mitsubishi Evolution X Intercooler Pipe Kit includes high-quality stainless steel T-bolt clamps for each connection. These clamps provide the holding power you need for increased boost pressures! The Mishimoto Mitsubishi Lancer Evolution X Performance Intercooler kit provides a dyno-proven increase of 10 whp and 10 tq, and it will support modified vehicles up to 600 whp! Whether you are making a pass at the drag strip or sliding around a rally stage, this intercooler kit will provide the cooling that your engine needs to perform at its best. This intercooler is available with a powder-coated finish in Sleek Silver or Stealth Black. As with all our products, this intercooler kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008,2010-2014\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer\u003c\/td\u003e\n\u003ctd\u003eEvolution GSR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2008,2010-2014\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer\u003c\/td\u003e\n\u003ctd\u003eEvolution MR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2011\u003c\/td\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eLancer\u003c\/td\u003e\n\u003ctd\u003eEvolution MR Touring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720690110689,"sku":"MISMMINT-EVO-10KBK","price":1620.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/99f8ba4633fd6abb9aba03a84963d709.jpg?v=1650380213"},{"product_id":"mishimoto-15-16-ford-f-150-ecoboost-3-5l-black-performance-intercooler-kit-w-black-pipes","title":"Mishimoto 15-16 Ford F-150 EcoBoost 3.5L Black Performance Intercooler Kit w\/ Black Pipes","description":"Mishimoto has developed a direct-fit 2015-2016 3.5L F-150 EcoBoost Intercooler \u0026amp; Pipe kit that allows owners to maximize the performance potential of their F-150. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore technology. The 24% larger volume of our pipes allows your 2015-2016 3.5L F-150 EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. Our intercooler increases core volume by 77% over stock and external fin surface area by 163%. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2015-2016 3.5L F-150 EcoBoost Intercooler \u0026amp; Pipe kit is backed by our Lifetime Warranty.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2016\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720739524833,"sku":"MISMMINT-F35T-15KBBK","price":2738.98,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/32ec46f72e819746669cb0ba331f8a6d.jpg?v=1650380751"},{"product_id":"mishimoto-2017-ford-f150-3-5l-ecoboost-performance-intercooler-kit-black-cooler-black-pipes","title":"Mishimoto 2017+ Ford F150 3.5L EcoBoost Performance Intercooler Kit - Black Cooler Black Pipes","description":"Mishimoto has developed a direct-fit 2017+ 3.5L F-150 EcoBoost Intercooler \u0026amp; Pipe kit that allows owners to maximize the performance potential of their F-150 or second-gen Raptor. Our kit replaces the weak and unattractive plastic piping with free-flowing, durable aluminum piping and silicone boots with DuraCore? technology. The larger volume of our pipes allows your 2017+ 3.5L EcoBoost to breathe free and make the most of the its two turbochargers. DuraCore? boots coupled with constant-tension worm gear clamps provide superior strength and blowout resistance, ensuring boost always makes it to its destination. Combine our piping with the Mishimoto 2015+ F-150 EcoBoost Intercooler to unleash everything the twin-turbo 3.5L EcoBoost engine is capable of. Our intercooler increases core volume by 77% over stock and external fin surface area by 163%. With cast end tanks and bar-and-plate construction, our intercooler combines strength and power for an all-around upgrade over stock. This kit is available with a black or silver intercooler and wrinkle black or polished pipes. As with all Mishimoto products, this 2017 3.5L F-150 EcoBoost Intercooler \u0026amp; Pipe kit is backed by our Lifetime Warranty.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eKing Ranch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003ePlatinum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eRaptor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eSSV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eTremor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2017-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720739754209,"sku":"MISMMINT-F35T-17KBBK","price":2680.04,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/b9abbc449caa7826d4d241da1ba0f740.jpg?v=1650380777"},{"product_id":"mishimoto-2013-ford-focus-st-black-intercooler-w-black-pipes","title":"Mishimoto 2013+ Ford Focus ST Black Intercooler w\/ Black Pipes","description":"It?s time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720777535713,"sku":"MISMMINT-FOST-13KBBK","price":1719.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/3a8ff21e7fe70b0e7b2a0ebf039d0740.png?v=1650381403"},{"product_id":"mishimoto-2013-ford-focus-st-gold-intercooler-w-polished-pipes","title":"Mishimoto 2013+ Ford Focus ST Gold Intercooler w\/ Polished Pipes","description":"It?s time to make your cool off your hot-hatch with the Mishimoto Performance Intercooler Kit for the 2013+ Ford Focus ST. Ford released their 2.0T EcoBoost powered Focus boasting the perfect combination of performance and practicality, however the intercooling system left something to be desired. While the piping did feature sections of aluminum, the restrictive diameter, not to mention the turbo muffler put a damper on the Focus ST?s performance potential. We?ve replaced the hot-side pipe with mandrel-bent aluminum, both ditching the muffler and also opening up the diameter to allow a 26% better flow through the hot-side. All of the degradation-prone rubber has also been swapped for wire-reinforced silicone ensuring a long lasting connection on the hot-side, but also a soother flow through the cold-side pipe. Together the Focus ST Intercooler Pipe kit grants a 21% increase in flow to and from the intercooler. The piping isn?t the only part of this kit that increases flow, the bar-and-plate construction opens up air channels within the core allowing for the charged air to pass through more freely than the stock intercooler core. This upgraded all aluminum construction also aids in heat dissipation, warding off the dreaded heat-soak under demanding driving conditions, and delivering properly cooled air through the ST?s intake manifold. The Focus ST Performance Intercooler Kit will also add 8 HP and 10 TQ to your power band and has a maximum horsepower rating of 550HP. The Mishimoto Performance Intercooler Kit for your 2013+ is available in silver, black, or gold, with an option of wrinkle black or polished piping. As always, this intercooler kit is covered under the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2013-2018\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eFocus\u003c\/td\u003e\n\u003ctd\u003eST\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720779010273,"sku":"MISMMINT-FOST-13KPGD","price":1719.38,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/12fa19256af01a238b2a91856e9ae51d.jpg?v=1650381467"},{"product_id":"mishimoto-10-12-hyundai-genesis-coupe-2-0l-m6vr1-intercooler-and-piping-kit-black","title":"Mishimoto 10-12 Hyundai Genesis Coupe 2.0L M6VR1 Intercooler and Piping Kit - Black","description":"OEM intercooler setups are not designed to handle the higher levels of boost that come with modifying your turbocharged vehicle.The Mishimoto intercooler and piping kit is designed as an ideal upgrade for the 2.0L Turbo 2010-2012 Hyundai Genesis Coupe intercooler.The intercooler and piping kit reduces intake temperatures and increases overall cooling efficiency, resulting in a safe increase in horsepower.Unlike most other aftermarket intercooler kits available, modifications to the front bumper and removal of the crash bar are not necessary, since our kit retains OEM fitment.Included in this comprehensive kit is a polished aluminum, black, or gold bar and plate style Z Line intercooler, a complete set of aluminum charge piping, along with all t-bolt clamps and silicone couplers needed for direct bolt-on installation.The Mishimoto Hyundai Genesis Coupe intercooler and piping kit will fit with the OEM radiator, as well as the Mishimoto Hyundai Genesis Aluminum Radiator.Note: For your taste, only one side of the intercooler has the Mishimoto logo.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e2.0T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e2.0T Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e2.0T R-Spec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e2.0T Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e3.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e3.8 Grand Touring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2011-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e3.8 R-Spec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2010-2012\u003c\/td\u003e\n\u003ctd\u003eHyundai\u003c\/td\u003e\n\u003ctd\u003eGenesis Coupe\u003c\/td\u003e\n\u003ctd\u003e3.8 Track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720779436257,"sku":"MISMMINT-GEN4-10G","price":883.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/96b032b485d36c7ec5878ab00f971fc4.jpg?v=1650381510"},{"product_id":"mishimoto-2015-ford-mustang-ecoboost-front-mount-intercooler-silver","title":"Mishimoto 2015 Ford Mustang EcoBoost Front-Mount Intercooler - Silver","description":"For the first time in over 30 years, the iconic Ford Mustang is available with a turbocharged 4-cylinder engine producing over 300 horsepower! Turbocharged 4-cylinder engines produce extremely hot charge air temperatures very quickly within a few laps on the track or aggressive street driving and stock tube-and-fin intercoolers also heat soak very easily. Mishimoto has developed a highly efficient bar-and plate intercooler engineered specifically for the Mustang EcoBoost to keep your air intake temperatures consistently low, run after run. This intercooler is a direct-fit unit requires no modification to your Mustang. The Engineers at Mishimoto designed this intercooler to fit with the stock active grille shutters, as well as prevent airflow blockage to the radiator and AC condenser by mounting it in the stock location. This cooler is constructed with cast end tanks that are CFD tested for maximum airflow and includes an in-tank air diverter, on the hot side, to provide optimal flow through the intercooler. The Mustang EcoBoost Performance Intercooler reduces intake temperatures by 35 F (19.45 C) with minimal pressure loss, has a 25% increase in core volume and 165% increase in external fin surface area, providing maximum cooling for your Mustang. This intercooler features precision TIG-welding and is available with a Sleek Silver or Stealth Black finish. As with all our products, the Mishimoto Mustang EcoBoost Performance Intercooler includes the Mishimoto Lifetime Warranty.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eBullitt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eEcoBoost Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT 50 Years Limited Edition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eGT Premium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eMach 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2020\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT350R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2020-2021\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eShelby GT500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2017\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003eV6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720783040737,"sku":"MISMMINT-MUS4-15SL","price":1025.41,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/5a07f23cf64eed7eab668d9b08fba047_14f1c550-587c-40d7-8ebc-b21497a3ebd1.jpg?v=1650381720"},{"product_id":"mishimoto-19-ford-ranger-2-3l-ecoboost-intercooler-kit-black-mwbk-pipes","title":"Mishimoto 19+ Ford Ranger 2.3L EcoBoost Intercooler Kit - Black + MWBK Pipes","description":"they also translate into power in the real world. The Mishimoto Ranger performance intercooler kit produces dyno-proven gains of 13.6 whp and 13.9 lb-ft of torque, all while maintaining less pressure drop than the stock intercooler system from inlet to outlet.This Mishimoto 2019+ Ford Ranger 2.3L EcoBoost Performance Intercooler Kit includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto high-torque worm gear clamps for consistent holding power. Bungs on the intercooler end tank and cold-side intercooler pipe can be drilled and tapped for a boost sensor or water-meth injection. This intercooler kit does not interfere with active grille shutters or adaptive cruise control, and the CNC-machined quick-disconnect inlet and outlet make installation a breeze. Like all our Ford Ranger parts, this 2019+ Ford Ranger Performance Intercooler kit is backed by our Mishimoto Lifetime Warranty for a lifetime of performance.\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eLariat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2019-2022\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eRanger\u003c\/td\u003e\n\u003ctd\u003eXLT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42720827179233,"sku":"MISMMINT-RGR-19KBKBK","price":1806.31,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/7c3a5c2c5a5dc88383286330c9ebeea8.jpg?v=1650382229"},{"product_id":"mishimoto-15-subaru-wrx-front-mount-intercooler-kit-black-core","title":"Mishimoto 15+ Subaru WRX Front-Mount Intercooler Kit - Black Core","description":"\"Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. The Mishimoto front-mount intercooler was designed with a large 28\" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto WRX front-mount intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile. The Mishimoto Subaru WRX Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25\" in diameter to keep airflow velocities high, giving your car an instant response without excessive throttle lag that plagues many front-mount intercooler designs. The hot-side pipe also features a CNC-machined flange for a leak free connection to the turbo. The cold side of the system features 2.5\" to 2.75\" mandrel-bent aluminum tubing for maximum airflow, and to match the diameter of your throttle body. This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler. The kit includes all necessary mounting brackets, including a new bracket for the air intake. Our WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and compliments the Mishimoto Subaru WRX Performance Air Intake for added cooling power. Mishimoto tested this intercooler on our Stage 2 265whp WRX\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42769932615905,"sku":"MISMMINT-WRX-15BK","price":2394.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/4957e3fb0cea07232655a5319b625b47.jpg?v=1651571131"},{"product_id":"mishimoto-15-subaru-wrx-front-mount-intercooler-kit-silver-core","title":"Mishimoto 15+ Subaru WRX Front-Mount Intercooler Kit - Silver Core","description":"\"Designed for applications that demand the greatest airflow and cooling capabilities, the Mishimoto WRX Front-Mount Intercooler Kit will provide your Subaru with the ability to make the most horsepower and torque possible. The Mishimoto front-mount intercooler was designed with a large 28\" intercooler core that provides the maximum cooling capability without excessive pressure drops that will wear out any turbocharger over time. The Mishimoto WRX front-mount intercooler features smooth cast end tanks that are CFD tested for maximum airflow with no sharp walls or bends from cut-and-weld end tanks that disrupt airflow. The intercooler provides the best airflow and heat-exchange properties for those time-attack laps, or a 10-second blast down the quarter mile. The Mishimoto Subaru WRX Front-Mount Intercooler also features four mandrel-bent aluminum pipes for optimum airflow. The hot-side pipes are 2.25\" in diameter to keep airflow velocities high, giving your car an instant response without excessive throttle lag that plagues many front-mount intercooler designs. The hot-side pipe also features a CNC-machined flange for a leak free connection to the turbo. The cold side of the system features 2.5\" to 2.75\" mandrel-bent aluminum tubing for maximum airflow, and to match the diameter of your throttle body. This 2015 WRX front-mount intercooler kit contains everything needed for a worry-free installation, including an application-specific crash bar that both supports the intercooler and mounts to existing points on the vehicle. No cutting of the front bumper or drilling is required to install the crash bar and intercooler. The kit includes all necessary mounting brackets, including a new bracket for the air intake. Our WRX front-mount intercooler kit also includes every coupler and clamp you need for a clean install, and compliments the Mishimoto Subaru WRX Performance Air Intake for added cooling power. Mishimoto tested this intercooler on our Stage 2 265whp WRX\u003cbr\u003e\u003cbr\u003eThis Part Fits:\u003cp\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eBase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003eLimited\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2015-2021\u003c\/td\u003e\n\u003ctd\u003eSubaru\u003c\/td\u003e\n\u003ctd\u003eWRX\u003c\/td\u003e\n\u003ctd\u003ePremium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":42769933107425,"sku":"MISMMINT-WRX-15SL","price":2394.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0329\/9911\/2839\/products\/855985ab938e0dfb512a4ec1021bed21.jpg?v=1651571163"}],"url":"https:\/\/t1motorsports.ca\/collections\/intercooler-kits-2.oembed","provider":"T1 Motorsports","version":"1.0","type":"link"}