ADRO Porsche 992.1/992.2 GT3 Prepreg Carbon Fiber Front Fenders
Tax excluded. Shipping calculated at checkout
BUILT TO RESPECT THE FORMULA
Refined by ADRO. Balanced like Porsche intended. Built for the newest GT3.
Since 1999, the 911 GT3 has run one formula: naturally aspirated engine, motorsport-derived chassis, no shortcuts. The 992.2 is the latest and sharpest expression of that formula and one of the last cars built that way. That starting point deserves respect, not a redesign.
ADRO's aero program for the 992.2 GT3 was built to honor that. The goal wasn't to reinvent the car. It was to make it faster where it counts: more downforce, at minimal drag cost, without disturbing the front-to-rear balance Porsche already tuned in. Every component in this kit earns its place by contributing to that single objective.
THE ENGINEERING
Front Fenders
A front wheelarch at speed is a pressure trap. Air pumped in by the rotating wheel and fed in from the underbody has nowhere to go — and that trapped high-pressure air does two bad things at once: it pushes up on the bodywork, generating lift exactly where you want grip, and it chokes the flow trying to pass under the front splitter.
The ADRO front fenders solve both. Upper vents on the guards give that high-pressure air a clean exit path over the top of the wheel, while pressure relief exits behind the front wheels bleed the arch out to the low-pressure zone along the body side. Venting the arch drops the pressure inside it — which cuts front-end lift directly, and lets the splitter and underbody pull through more flow, increasing the downforce the whole front end generates. The splitter can only work as hard as the arch lets it.
There's a drag benefit too: air that exits the arch in a controlled way, where the fender directs it, creates far less turbulence than air forced out chaotically around the wheel and into the flow along the side of the car.
Replacing the fender changes what packages behind it, so ADRO engineered its own washer fluid reservoir that sits behind the fender in place of the factory piece. You keep full washer function with nothing to fabricate or relocate.
The Numbers
Paired as a complete system, the full 992.2 GT3 aero kit increases downforce by 21% over stock for roughly a 1% drag penalty, based on CFD simulation at 180 km/h (112 mph), while holding the GT3's original front-to-rear balance. In raw terms, that's 244N (55 lbs) of load at that speed — but downforce isn't ballast. It presses the tires into the road without adding weight the car has to carry through a corner or haul down under braking, and it builds with speed, so there's more of it exactly when you're leaning on the car hardest. That's balanced grip you can actually use, with almost no loss of straight-line speed.
FAQ
At T1 Motorsports, Not only do we specialize in aftermarket parts, but we also specialize in all mechanical repairs. We are a full-service mechanical shop, with skilled technicians geared towards OEM and Aftermarket enthusiasts.
How Long Will It Take to Receive My Order?
Shipping times depend on your location and our inventory levels.
- In-Stock at T1 Motorsports Orders: Orders for in-stock items will be shipped out on the same business day.
- Out-of-Stock & Distant Warehouse Orders: If an item is not in stock or is located in a warehouse, it will take 2-3 weeks to arrive at our facility before being shipped using the method selected at checkout.
- Order Tracking & Confirmation: Delivery details, including tracking information, will be provided in your confirmation email once the order has shipped.
For any shipping-related questions, please contact T1 Motorsports customer support.
My Order Is Taking Longer Than Expected. What Can I Do?
At T1 Motorsports, we strive to ensure every customer is satisfied with their experience.
- Before your order is confirmed, you will receive an email with the estimated arrival time (ETA) for your shipment.
- While we do our best to meet all delivery expectations, unexpected delays may occur. Rest assured, our team is always here to help and resolve any issues.
- If you have any concerns regarding your order, please contact us directly, and we’ll work to find the best solution for you.
What Is Your Order & Shipping Policy?
It is your responsibility to provide accurate shipping information at checkout. T1 Motorsports is not liable for any delays, lost shipments, or additional costs resulting from incorrect or incomplete addresses submitted during ordering.
What Is Your Return & Exchange Policy?
All processed orders that have not shipped will incur a 6% processing fee, this is mainly to cover any payment processing and cancelation fee with the manufacturer or warehouse. A processed order is an order that has already been put in our system and the product has been taken out of inventory and moving towards the packing and shipping face.
On special order or custom-made orders, the processing face is indicated when the manufacturer has received our order. Please be courteous and notify us ASAP if you wish to cancel any order(s) that were recently placed in order to prevent it from shipping out.
Due to the nature of racing and performance vehicles, no returns will be accepted on special order items, opened, installed, incomplete, or otherwise used products. If a product is ordered and not wanted, the UNUSED item can be returned within 30 days after the product has been delivered. This does not apply to SPECIAL ORDER items. Once the product is returned, you have two options for your refund:
You may have your purchase refunded back on your original payment method minus a 20% restocking fee of the total amount. In this case, please know that the initial shipping is not refundable (free shipping items still incur shipping chargers which MUST be deducted on a return). All items wanting to be returned MUST be reported within 30 days of delivery date. If you are still browsing and want an alternate product, we can provide you with a full credit minus shipping costs as a T1 Motorsports store credit. Some brands are excluded and may incur up to a 10% restocking fee. Please contact us to confirm.
On both refund options, a return shipping label may be provided if you are unable to ship the product(s) back using your own method of shipping. This shipping cost will be deducted from your total refund or credit.
What Should I Do If My Ordered Product Doesn't Fit?
We strive on making our fitment guide perfect. If you have any fitment issues regarding your product, please contact us by email or phone and we will solve your issue.
What is Your Order Pickup Policy?
- Once you receive an email confirming that your order is ready for pickup, you may collect it at our store during regular business hours.
- If you wish to designate someone else to pick up your order, please notify us via email with their full name. They will need to provide a valid ID at the time of pickup.
- To expedite the process, please bring your order number when arriving at the store.
- You have 60 days from the date your order status is updated to "Ready for Pickup" to collect your order, unless a different pickup date has been agreed upon.
Orders not picked up within the 60-day window will be deemed abandoned and canceled. No refunds will be issued for abandoned orders.
Armstrong G
Had a great experience purchasing winter tires and rims here. Straightforward communication, promise delivered.
AeroWolf
Picked up my exhaust from T1 Motorsports. Awesome customer service from beginning to end. Every email I sent received a response very quickly and they were very informative and polite. Highly recommend for high-end parts!
Sandra G
Excellent experience with T1 motorsports. They were super responsive, very flexible with their service despite the holiday season and had competitive prices with knowledgeable staff